Skip to Main Navigation
The University of Texas at Dallas
Graduate Admissions

Department of Electrical Engineering


Professors: Naofal Al-Dhahir, Larry P. Ammann, Poras T. Balsara, Andrew J. Blanchard, Cyrus D. Cantrell III, Yves J. Chabal, David E. Daniel, John P. Fonseka, William R. Frensley, Andrea F. Fumagalli, Matthew Goeckner, Bruce E. Gnade, John H. L. Hansen, C. R. Helms, Louis R. Hunt (emeritus), Nasser Kehtarnavaz, Kamran Kiasaleh, Moon J. Kim, Gil S. Lee, Philipos C. Loizou, Duncan L. MacFarlane, Aria Nosratinia, Kenneth O, Raimund J. Ober, Lawrence J. Overzet, William Pervin (emeritus), Mario A. Rotea, Carl Sechen, Mark W. Spong, Don W. Shaw (emeritus), Lakshman S. Tamil, Mathukumalli Vidyasagar, Robert M. Wallace, Dian Zhou
Research Professor: Vojin Oklobdzija
Associate Professors: Dinesh Bhatia, Gerald O. Burnham, Jiyoung Kim, Jeong-Bong Lee, Jin Liu, Hlaing Minn, Won Namgoong, Mehrdad Nourani, Issa Panahi, Robert Rennaker, M. Saquib, Murat Torlak, Eric Vogel
Assistant Professors: Bhaskar Banerjee, Leonidas Bleris, Carlos A. Busso, Nicholas Gans, Rashaunda Henderson, Walter Hu, Roozbeh Jafari, Hoi Lee

Research Assistant Professors: Wooil Kim, Kostas Kokkinakis

Senior Lecturers: Charles P. Bernardin, Nathan B. Dodge, Edward J. Esposito, Muhammad A. Kalam, Jung Lee, Randall E. Lehmann, P. K. Rajasekaran, Ricardo E. Saad, Marco Tacca


The program leading to the M.S.E.E. degree provides intensive preparation for professional practice in the high technology microelectronic and telecommunications aspects of electrical engineering. It is designed to serve the needs of engineers who wish to continue their education. Courses are offered at a time and location convenient for the student who is employed on a full-time basis.

The objective of the doctoral program in electrical engineering is to prepare individuals to perform original, leading edge research in the broad areas of communications and signal processing; digital systems; microelectronics and nanoelectronics, optics, optoelectronics; lightwave devices and systems; and wireless communications. Because of our strong collaborative programs with Dallas-area microelectronics and telecommunications companies, special emphasis is placed on preparation for research and development positions in these high technology industries.


The Erik Jonsson School of Engineering and Computer Science has developed a state-of-the-art computational facility consisting of a network of Sun servers and Sun Engineering Workstations. All systems are connected via an extensive fiber-optic Ethernet and, through the Texas Higher Education Network, have direct access to most major national and international networks. In addition, many personal computers are available for student use.

The Engineering and Computer Science Building and the new Natural Science and Engineering Research Laboratory provide extensive facilities for research in microelectronics, telecommunications, and computer science. A Class 10000 microelectronics clean room facility, including e-beam lithography, sputter deposition, PECVD, LPCVD, etch, ash and evaporation, is available for student projects and research. The Plasma Applications and Science Laboratories have state-of-the-art facilities for mass spectrometry, microwave interferometry, optical spectroscopy, optical detection, in situ ellipsometry and FTIR spectroscopy. In addition, a modified Gaseous Electronics Conference Reference Reactor has been installed for plasma processing and particulate generation studies. Research in characterization and fabrication of nanoscale materials and devices is performed in the Nanoelectronics Laboratory. The Optical Measurements Laboratory has dual wavelength (visible and near infrared) Gaertner Ellipsometer for optical inspection of material systems, a variety of interferometric configurations, high precision positioning devices, and supporting optical and electrical components. The Optical Communications Laboratory includes attenuators, optical power meters, lasers, APD/p-i-n photodetectors, optical tables, and couplers and is available to support system level research in optical communications. The Photonic Testbed Laboratory supports research in photonics and optical communications with current-generation optical networking test equipment. The Nonlinear Optics Laboratory has a network of Sun workstations for the numerical simulation of optical transmission systems, optical routers and all-optical networks. The Electronic Materials Processing laboratory has extensive facilities for fabricating and characterizing semiconductor and optical devices. The Laser Electronics Laboratory houses graduate research projects centered on the characterization, development and application of ultrafast dye and diode lasers.

The Center for Integrated Circuits and Systems (CICS) promotes education and research in the following areas: digital, analog and mixed-signal integrated circuit design and test; multimedia, DSP and telecom circuits and systems; rapid-prototyping; computer architecture and CAD algorithms. There are several laboratories affiliated with this center. These laboratories are equipped with a network of workstations, personal computers, FPGA development systems, prototyping equipment, and a wide spectrum of state-of-the-art commercial and academic design tools to support graduate research in circuits and systems.

The Multimedia Communications Laboratory has a dedicated network of PC’s, Linux stations, and multi-processor, high performance workstations for analysis, design and simulation of image and video processing systems. The Signal and Image Processing (SIP) Laboratory has a dedicated network of PC's equipped with digital camera and signal processing hardware platforms allowing the implementation of advanced image processing algorithms. The Statistical Signal Processing Laboratory is dedicated to research in statistical and acoustic signal processing for biomedical and non-biomdedical applications. It is equipped with high-peformance computers and powerful textual and graphical software platforms to analyze advanced signal processing methods, develop new algorithms, and perform system designs and simulations. The Acoustic Research Laboratory provides number of test-beds and associated equipment for signal measurements, system modeling, real-time implementation and testing of algorithms related to audio/acoustic/speech signal processing applications such as active noise control, speech enhancement, dereverberation, echo cancellation, sensor arrays, psychoacoustic signal processing, etc.

The Center for Robust Speech Systems (CRSS) is focused on a wide range of research in the area of speech signal processing, speech and speaker recognition, and speech/language technology. CRSS is affiliated with HLTRI in the Erik Jonsson School, and collaborates extensively with faculty and programs across UTD on speech and language research. CRSS supports an extensive network of workstations, as well as a High-Performance Compute Cluster with over 15TB of diskspace and 72 CPU ROCS multi-processor cluster. The center also is equipped with several Texas Instruments processors for real-time processing of speech signals, and two ASHA certified sound booths for perceptual/listening based studies and for speech data collection. CRSS supports mobile speech interactive systems through the UTDrive program for in-vehicle driver-behavior systems, and multi-modal based interaction systems via image-video-speech research.

The Broadband Communication Laboratory has design and modeling tools for fiber and wireless transmission systems and networks, and all-optical packet routing and switching. The Advanced Communications Technologies (ACT) Laboratory provides a design and evaluation environment for the study of telecommunication systems and wireless and optical networks. ACT has facilities for designing network hardware, software, components, and applications.

The Center for Systems, Communications, and Signal Processing, with the purpose of promoting research and education in general communications, signal processing, control systems, medical and biological systems, circuits and systems and related software, is located in the Erik Jonsson School.

The Wireless Information Systems (WISLAB) and Antenna Measurement Laboratories have wireless experimental equipment with a unique multiple antenna testbed to integrate and to demonstrate radio functions (i.e. WiFi and WiMAX) under different frequency usage characteristics. With the aid of the Antenna Measurement Lab located in the Waterview Science and Technology Center (WSTC), the researchers can design, build, and test many types of antennas.

The faculty of the Erik Jonsson School’s Photonic Technology and Engineering Center (PhoTEC) carry out research in enabling technologies for microelectronics and telecommunications. Current research areas include nonlinear optics, Raman amplification in fibers, optical switching, applications of optical lattice filters, microarrays, integrated optics, and optical networking.

In addition to the facilities on campus, cooperative arrangements have been established with many local industries to make their facilities available to UT Dallas graduate engineering students.

Master of Science in Electrical Engineering

Admission Requirements

The University’s general admission requirements are discussed here.

A student lacking undergraduate prerequisites for graduate courses in electrical engineering must complete these prerequisites or receive approval from the graduate adviser and the course instructor.

A diagnostic exam may be required. Specific admission requirements follow.

The student entering the M.S.E.E. program should meet the following guidelines:

An undergraduate preparation equivalent to a baccalaureate in electrical engineering from an accredited engineering program, A grade point average in upper-division quantitative course work of 3.0 or better on a 4-point scale, and GRE scores of 500, 700 and 4 for the verbal, quantitative and analytical writing components, respectively, are advisable based on our experience with student success in the program.

Applicants must submit three letters of recommendation from individuals who are able to judge the candidate’s probability of success in pursuing a program of study leading to the master’s degree. Applicants must also submit an essay outlining the candidate’s background, education and professional goals. Students from other engineering disciplines or from other science and math areas may be considered for admission to the program; however, some additional course work may be necessary before starting the master’s program.

Degree Requirements

The University’s general degree requirements are discussed here.

The M.S.E.E. requires a minimum of 33 semester hours.

All students must have an academic advisor and an approved degree plan. These are based upon the student’s choice of concentration (Communications and Signal Processing; Digital Systems; Circuits and Systems; RF and Microwave Engineering, Biomedical Applications of Electrical Engineering, Solid State Devices and Micro Systems Fabrication; Optical Devices, Materials and Systems). Courses taken without advisor approval will not count toward the 33 semester-hour requirement. Successful completion of the approved course of studies leads to the M.S.E.E., M.S.E.E. with major in Telecommunications, or M.S.E.E. with major in Microelectronics degree.

The M.S.E.E. program has both a thesis and a non-thesis option. All part-time M.S.E.E. students will be assigned initially to the non-thesis option. Those wishing to elect the thesis option may do so by obtaining the approval of a faculty thesis supervisor. With the prior approval of an academic advisor, non-thesis students may count no more than 6 semester-hours of research or individual instruction courses towards the 33-hour degree requirement.

All full-time, supported students are required to participate in the thesis option. The thesis option requires six semester hours of research, a written thesis submitted to the graduate school, and a formal public defense of the thesis. The supervising committee administers this defense and is chosen in consultation with the student’s thesis adviser prior to enrolling for thesis credit. Research and thesis hours cannot be counted in a M.S.E.E. degree plan unless a thesis is written and successfully defended.


This degree program is designed for students who want a M.S.E.E. without a designated degree specialization. One of the six concentrations listed below, subject to approval by a graduate adviser, should be used to fulfill the requirements of this program. Students must achieve an overall GPA of 3.0 or better, a GPA of 3.0 or better in their core MSEE classes, and a grade of B- or better in all their core MSEE classes in order to satisfy their degree requirements.

M.S.E.E. with Major in Telecommunications

Within Telecommunications, there are two concentrations: Communications and Signal Processing, and Digital Systems.

Communications and Signal Processing

This curriculum emphasizes the application and theory of all phases of modern communications and signal processing used in telecommunications.

Each student electing this concentration must take EESC 6349, EESC 6352, and EESC 6360, and one of the following: EESC 6331, EESC 6340, EESC 6350 (12 hours).

Approved electives must be taken to make a total of 33 hours.

Digital Systems

The goal of the curriculum is to educate students about issues arising in the design and analysis of digital systems, an area relevant to a variety of high-technology industries. Because the emphasis is on systems, course work focuses on three areas: hardware design, software design, analysis and modeling.

Each student electing this concentration must take four required courses. Two of the courses are EEDG 6301 and EEDG 6304. The remaining two must be selected from EEDG 6302, EECT 6325, and EEDG 6345 (12 hours).

Approved electives must be taken to make a total of 33 hours.

M.S.E.E. with Major in Microelectronics

Within Microelectronics, there are five concentrations: Circuits and Systems; Solid State Devices and Micro Systems Fabrication; Optical Devices, Materials and Systems, RF and Microwave Engineering, and Biomedical Applications of Electrical Engineering.

Circuits and Systems

The courses in this curriculum emphasize the design and test of circuits and systems, and the analysis and modeling of integrated circuits.

Each student electing this concentration must take five required courses: Two of the courses are: EECT 6325 and EECT 6326. The remaining three must be selected from EEDG 6301, EEDG 6303, EEDG 6306, EEDG 6375, EECT 7325, EECT 7326, EECT 6378 and EERF 6330 (15 hours).

Approved electives must be taken to make a total of 33 hours.

Solid State Devices and Micro Systems Fabrication

This concentration is focused on the fundamental principles, design, fabrication and analysis of solid-state devices and associated micro systems.

Each student electing this concentration must take the following two courses: EEGR 6316, EEMF 6319 and at least two of the following four courses: EEMF 6320, EEMF 6321,EEMF 6322 and EEMF 6382

Additional standard electives include but are not limited to: EEMF 5383/EEMF 5283, EEMF 6324, EECT 6325, EEMF 6372, EEMF 6383/EEMF 6283, EEMF 6382, EEMF 7320, EECT 7325.

Approved electives must be taken to make a total of 33 hours.

Optical Devices, Materials and Systems

This curriculum is focused on the application and theory of modern optical devices, materials and systems.

Each student electing this concentration must take the following four required courses: EEOP 6314, EEGR 6316, EEOP 6317, and at least one of the following two courses: EEOP 6310 and EEOP 6329. (12 hours).

Approved electives must be taken to make a total of 33 hours.

RF and Microwave Engineering

This curriculum is focused on the application and theory of modern electronic devices, circuits and systems in the radiofrequency and microwave regime.

Each student electing this concentration must take the following four required courses: EERF 6311, EEGR 6316, EERF 6355, and EERF 6395. (12 hours).

Approved electives must be taken to make a total of 33 hours.

Biomedical Applications of Electrical Engineering

This curriculum provides a graduate-level introduction to advanced methods and biomedical applications of electrical engineering.

Each student electing this concentration must take EEBM 6371, EEBM 6373, EEBM 6374, and two core courses from any one other concentration. (15 hours).

Approved electives must be taken to make a total of 33 hours.

Graduate Certificate in Infrared Technology

Admission Requirements

Students seeking the Graduate Certificate in IR technology may be admitted in either degree-seeking or non-degree-seeking status. The University’s requirements for admission as a non-degree-seeking graduate student are discussed here. Up to 15 semester credit hours earned in non-degree-seeking status may be transferred for degree credit when a student is admitted to degree-seeking status. Students seeking the Infrared Technology Certificate should have an undergraduate preparation equivalent to a Bachelor of Science in Electrical Engineering or Physics. Students who lack the undergraduate prerequisites for the courses required for the Infrared Technology Certificate must complete these prerequisites or receive approval from the graduate adviser and the course instructor.

Each student electing the Graduate Certificate in IR Technology must take the following five courses: EEGR 6316, EEOP 6317, EEOP 6309, EEOP 6315, and EEOP 6335.

At the time of completion of the course requirements for the Infrared Technology Certificate, each student must have a grade point average of at least 3.00 and must meet all other requirements for good academic standing.

Doctor of Philosophy in Electrical Engineering

Admission Requirements

The University’s general admission requirements are discussed here.

The Ph.D. in Electrical Engineering is awarded primarily to acknowledge the student’s success in an original research project, the description of which is a significant contribution to the literature of the discipline. Applicants for the doctoral program are therefore selected by the Electrical Engineering Program Graduate Committee on the basis of research aptitude, as well as academic record. Applications for the doctoral program are considered on an individual basis.

The following are guidelines for admission to the Ph.D. program in Electrical Engineering:

A master’s degree in electrical engineering or a closely associated discipline from an accredited U.S. institution, or from an acceptable foreign university. Consideration will be given to highly qualified students wishing to pursue the doctorate without satisfying all of the requirements for a master’s degree.A grade point average in graduate course work of 3.5 or better on a 4-point scale. GRE scores of 500, 700 and 4 for the verbal, quantitative and analytical writing components, respectively, are advisable based on our experience with student success in the program.

Applicants must submit three letters of recommendation on official school or business letterhead or the UTD Letter of Recommendation Form from individuals who are familiar with the student’s record and able to judge the candidate’s probability of success in pursuing doctoral study in electrical engineering.

Applicants must also submit a narrative describing their motivation for doctoral study and how it relates to their professional goals.

For students who are interested in a Ph.D. but are unable to attend school full-time, there is a part-time option. The guidelines for admission to the program and the degree requirements are the same as for full-time Ph.D. students. All students must have an academic adviser and an approved plan of study.

Degree Requirements

The University’s general degree requirements are discussed here.

Each program for doctoral study is individually tailored to the student’s background and research objectives by the student’s supervisory committee. The program will require a minimum of 75 semester credit hours beyond the baccalaureate degree. These credits must include at least 30 semester hours of graduate level courses beyond the baccalaureate level in the major concentration. All PhD students must demonstrate competence in the Master's level core courses in their research area. All students must have an academic advisor and an approved plan of study.

Also required are:

         A research oriented oral qualifying examination (QE) demonstrating competence in the Ph.D. candidate’s research area. A student must make an oral presentation based on a review of 2 to 4 papers followed by a question-answer session. Admission to Ph.D. candidacy is based on two criteria: Graded performance in the QE and GPA in graduate level organized courses. A student entering the Ph.D. program with a M.S.E.E. must pass this exam within 3 long semesters, and a student entering without an M.S.E.E. must pass this exam within 4 long semesters. A student has at most two attempts at the QE. The QE will be given during the fall and spring semesters.

         A comprehensive examination consisting of: a written dissertation proposal, a public seminar, and a private oral examination conducted by the Ph.D. candidate’s supervising committee.

         Completion of a major research project culminating in a dissertation demonstrating an original contribution to scientific knowledge and engineering practice. The dissertation will be defended publicly. The rules for this defense are specified by the Office of the Dean of Graduate Studies. Neither a foreign language nor a minor is required for the Ph.D. However, the student’s supervisory committee may impose these or other requirements that it feels are necessary and appropriate to the student’s degree program.


The principal concentration areas for the M.S.E.E. program are: Communications and Signal Processing; Digital Systems; Circuits and Systems; Optical Devices, Materials, and Systems; and Solid-State Devices and Micro Systems Fabrication. Besides courses required for each concentration, a comprehensive set of electives is available in each area.

Doctoral level research opportunities include: VLSI design and test, computer architecture, embedded systems, computer aided design (CAD), ASIC design methodologies, high speed system-on chip design and test, reconfigurable computing, network processor design, interconnection networks, nonlinear signal-processing, smart antennas and array processing, statistical and adaptive signal processing, multimedia signal processing, image processing, real-time imaging, medical image analysis, pattern recognition, speech processing, control theory, digital communications, modulation and coding, electromagnetic-wave propagation, diffractive structures, fiber and integrated optics, nonlinear optics, optical transmission systems, all-optical networks, optical investigation of material properties (reflectometry and ellipsometry), optical metrology, lasers, quantum-well optical devices, theory and experiments in semiconductor-heterostructure devices, plasma deposition and etching, nanoelectronics, wireless communication, network protocols and evaluation, mobile computing and networking, and optical networking.

Interdisciplinary Opportunities: Continuing with the established tradition of research at U. T. Dallas, the Electrical Engineering Program encourages students to interact with researchers in the strong basic sciences and mathematics. Cross disciplinary collaborations have been established with the Chemistry, Mathematics, and Physics programs of the School of Natural Sciences and with faculty in the School of Brain and Behavioral Science.


Last Updated: February 28, 2011